Variation ID | Pack Size | List Price | Qty | ||
---|---|---|---|---|---|
photo_camera | 1 Pack
P011037 |
£137.43 |
The Purite Labwater is a simple, cost-effective option for producing low volumes of purified water between 1 and 10μS/cm on-demand.
Purite Labwater units can easily be wall-mounted and are simply connected by a conventional hose to a laboratory tap. They operate under standard water pressure, so no additional parts are required.
The Purite Labwater uses a special resin which absorbs ionic contaminants. As the resin becomes saturated its colour changes from blue to brown to indicate when a replacement cartridge is required.
Flow Rate
Between 1 and 10μS/cm on-demand.
Quality of Water Produced
Type II deionised water.
Suitable Applications
General Lab use.
Bench or Wall Mounting Ability
Purite Labwater units can easily be wall-mounted and are simply connected by a conventional hose to a laboratory tap. They operate under standard water pressure, so no additional parts are required.
Labwater 1 | Labwater 2 | |
Dims, w x d x h, mm | 80 x 100 x 580 | 80 x 100 x 760 |
Feedwater | Potable | Potable |
Max TDS, ppm | 1000 | 1000 |
Feedwater Temp, °C | 1 - 35 | 1 - 35 |
Max Feed Pressure, bar | 0.5 – 5 | 0.5 – 5 |
Max Feed Flow Rate, L/hr | 30 | 60 |
Output @ 50mg/L tds (soft) | 640 | 1280 |
Output @ 200mg/L tds (medium-hard) | 160 | 320 |
Output @ 300mg/L tds (hard) | 106 | 212 |
pH | Neutral | Neutral |
Conductivity, µS/cm | 1 - 10 | 1 - 10 |