Purite HP320 GP BP Wifi Water Purification System without Tank

Purite HP – WiFi

For clinical laboratory analyser feeder
Type II / Deionised (DI) water

Designed for use in laboratory applications, such as HPLC, ion chromatography, atomic absorption, hydrogen generation and clinical analyser feed, the Purite HP produces a consistent flow of purified water to a quality better than 10MΩ.cm.

GP units are not supplied with a tank, they are designed to be used in conjunction with external 50 or 100L tanks - available here

Key Features

Output
Dispense rate of up to 2 litres/min.

Quality of Water Produced
Type II deionised water. Guaranteed > 10MΩ.cm water quality.

Suitable Applications
General Lab use such as glassware rinsing, buffers and stains, reagent make-up, and media preparation.

Bench or Wall Mounting Ability
Purite units can easily be wall-mounted and are simply connected by a conventional hose to a laboratory tap. They operate under standard water pressure, so no additional parts are required.

Clear Display
Easy to use LCD – Colour touch screen.

Energy Saving
Features an energy saving intelligent stand-by mode.

Unit Specification

Specification	160	320
Width (mm)	440	440
Depth (mm)	560	560
Height (mm)	750	750
Max shipping weight (kg)	36	41
Max working weight (kg)	51	59

Installation Requirements

Requirement	Value
Power	Single Phase, 110–230V, +/-10%, 50/60 Hz
Feed water	Potable
Maximum TDS (ppm)	1000
Minimum inlet pressure – psi (bar)	30 (2.1)
Maximum inlet pressure – psi (bar)	90 (6.2)
Feed water temperature	1–35°C

Product Outputs*

Temperature	160 (l/hr)	320 (l/hr)
@ 10°C	14.4	30
@ 25°C	24	48

Product outputs based on a feed water pressure of 4 bar.

System Specification

Feature	Details
Pure water storage	20 litre storage tank as standard (External 50 & 100 litre tanks available)
Display panel	LCD – Colour touch screen
Pre-treatment cartridge	✓
Reverse osmosis	✓
Deionisation cartridge	✓
Internal filtration	Microfiltration
Point of use	UV / LED
UV lamp	✓
Recirculation pump	✓
Ultrapure polishing cartridge	– (External tank version only)

Treated Water Specification

High Purity Dispense

Parameter	Value
Inorganics	>10 MΩ·cm
pH†	Neutral
Bacteria	<1 cfu/ml
Organics – TOC (ppb)	<20
Particles	0.005 μm
Endotoxins	–
DNases	–
RNases	–

Purified Water Storage Tank

Parameter	Value
Dispense modes	Latched – hold
Dispense flow rate	Up to 2.0 l/min

† pH of stored water may decrease due to absorption of free carbon dioxide.