Purite Fusion 320 GP Type I Ultrapure Water System without Internal Tank

Purite Fusion

For clinical laboratory water
Type I / Ultrapure water (UPW) water

The Purite Fusion is a self-contained water purification unit that delivers a flow of purified water to a consistent quality of 18MΩ.cm from a mains supply to life science laboratories. It is ideal for the most demanding laboratory processes including life sciences, such as histology, cell and tissue culture, DNA sequencing and IVF. A raw water boost pump is included as standard for optimum performance. Combining reverse osmosis, deionisation, ultra-filtration and photo-oxidation in a compact, self-contained unit, the Purite Fusion has an intelligent energy-save mode and is available with a range of options. These include: dual water quality Type I and II, remote dispense pod and a choice of external storage tanks, plus a water and energy-saving ECO option.

GP units are not supplied with a tank, they are designed to be used in conjunction with external 50 & 100L tanks - available here

Key Features

Output
2 litres/minute

Quality of Water Produced
Dual water quality available 1-10MΩ.cm (Type II) and 18.2MΩ.cm (Type I)

UV Protection
UV LED disinfection incorporated within the dispense head

Suitable Applications
General Lab use such as glassware rinsing, buffers and stains, reagent make-up, and media preparation.

Bench or Wall Mounting Ability
Purite units can easily be wall-mounted and are simply connected by a conventional hose to a laboratory tap. They operate under standard water pressure, so no additional parts are required.

Clear Display
Easy to use LCD – Colour touch screen.

Easy Maintenence
Features a semi-automatic clean cycle.

Unit specification	160	320
Width (mm)	440	440
Depth (mm)	560	560
Height (mm)	750	750
Maximum Shipping Weight (kg)*	36	41
Maximum Working Weight (kg)*	51	59

 

Installation requirements	160	320
Power	Single Phase, 110-230V, +/- 10%, 50/60 Hz
Feed Water	Potable	Potable
Maximum TDS (ppm)	1000	1000
Minimum inlet pressure – psi (bar)	10 (0.5)	10 (0.5)
Maximum inlet pressure – psi (bar)	30 (2)	30 (2)
Feed water temperature	1-35°C	1-35°C
Product outputs @ 10ºC (l/hr)*	14.4	30
Product outputs @ 25ºC (l/hr)*	24	48

 

*Outputs based on a feed water pressure of 4 bar

 

System specification	160 and 320
Pure water storage	20 litre storage tank as standard (External 50 & 100 litre tanks available)
Display panel	LCD – Colour touch screen
Pre-treatment cartridge	Yes
Reverse osmosis	Yes
Deionisation cartridge	Yes
Internal filtration	Ultrafiltration
Point of use	UV / LED
UV lamp	185nm / 254nm
Recirculation pump	Yes
Ultrapure polishing cartridge	Yes

 

Treated water specification	High Purity Dispense	Purified Water Storage Tank
Inorganics	up to 18.2MΩ.cm	> 1MΩ.cm
pH*	Neutral
Bacteria	< 0.1cfu/ml	–
Organics – TOC (ppb)	< 5	< 50
Particles	0.005µm	–
Endotoxins	< 0.001EU/ml	–
DNases	< 4pg/µl	–
RNases	< 0.01ng/ml	–
Dispense modes	Latched – hold – volumetric
Dispense flow rate	up to 2.0 l/min	–

 

*pH of stored water may decrease due to absorption of free carbon dioxide