Purite Descale 160 ECO Water Purification System with Internal Tank

Purite Descale 160 ECO 

The Purite Descale 160 ECO produces consistent RO quality water from a standard potable water supply in a simple low footprint package.

The ECO membrane uses approximately 50% less water, resulting in lower running costs. Together with minimal maintenance reducing downtime, it is ideally suited for feeding high quality water to washers, autoclaves, polishers and other equipment that requires a standard RO permeate supply.

Key Features

Output
Up to 24 litres/hour at 25°C

Quality of Water Produced
RO grade water. Removes up to 99% of bacteria, colloids and organic contaminants. Dissolved salt rejection up to 98%.

Suitable Applications
General Lab use such as glass washers, humidifiers, autoclaves, hydroponics.

Bench or Wall Mounting Ability
Purite units can easily be wall-mounted and are simply connected by a conventional hose to a laboratory tap. They operate under standard water pressure, so no additional parts are required.

Clear Display
Easy to use HMI touch screen.

Simple to Maintain
Reduced down time – Minimal maintenance requirements and consumable changes.

Economical Usage
Reduced running costs – Eco membrane uses approximately 50% less water.

Wifi Technology
Allowing remote monitoring and also water quality monitoring alerting the end user if quality deteriorates.

Technical Specifications

Unit Specification

Parameter	Value
Width (mm)	440
Depth (mm)	560
Height (mm)	750
Max shipping weight (kg)	36
Max working weight (kg)	41

Installation Requirements

Parameter	Value
Power	Single Phase, 100–240V, +/-10%, 50/60 Hz
Feed water	Potable
Maximum TDS (ppm)	1000
Minimum inlet pressure – psi (bar)	10 (0.5)
Maximum inlet pressure – psi (bar)	30 (2.0)
Feed water temperature (min/max)	1–35°C

Product Outputs*

Condition	Output (L/hr)
@ 10°C	14.4
@ 25°C	24

* Product outputs based on a feed water pressure of 4 bar.

System Specification

Parameter	Value
Pure water storage	20 litre storage tank as standard (External 100 litre tank available)
Display panel	LCD – Colour touch screen
Pre-treatment cartridge	✔
Reverse osmosis	✔
Deionisation cartridge	–
Internal filtration	–
Point of use	–
UV lamp	–
Recirculation pump	–
Ultrapure polishing cartridge	–

Treated Water Specification

Parameter	Value
Inorganics	> 98% rejection
pH†	Neutral
Bacteria	> 99% rejection†
Organics – TOC (ppb)	–
Particles	–
Endotoxins	–
DNases	–
RNases	–
Dispense modes	Bib tap on storage tank
Dispense flow rate (L/min)	–

† pH of stored water may decrease due to absorption of free carbon dioxide.
† When measured directly across the membrane.