Purewater 300 Package

Purite Purewater 300 Package

The Purite Purewater 300 Package is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1MΩ.cm at a flow rate of up to 48 litres per hour.

Consists of the Purite Analyst 320GP, 100 Ltr external tank & high flow washing machine tap.

It can be fitted with an on-demand pure water boost pump (optional extra) to provide up to 4.5 bar pressurised feed with a flow rate of up to 4500 litres per hour.

Key Features

Output
30 litres/hour at 10°C, 48 litres/hour at 25°C

Quality of Water Produced
Type II deionised water. Guaranteed > 1MΩ.cm water quality

Suitable Applications
General Lab use such as glassware rinsing, buffers and stains, reagent make-up, and media preparation.

Bench or Wall Mounting Ability
Purite units can easily be wall-mounted and are simply connected by a conventional hose to a laboratory tap. They operate under standard water pressure, so no additional parts are required.

Clear Display
Easy to use LCD – Colour touch screen.

Easy Maintenence
Features a semi-automatic clean cycle.

Technical Specifications

Unit Specification

Parameter	Value
Width (mm)	440
Depth (mm)	560
Height (mm)	750
Max shipping weight (kg)	36
Max working weight (kg)	51

Installation Requirements

Parameter	Value
Power	Single Phase, 110–230V, +/-10%, 50/60 Hz
Feed water	Potable
Maximum TDS (ppm)	1000
Minimum inlet pressure – psi (bar)	10 (0.7)
Maximum inlet pressure – psi (bar)	30 (2.0)
Feed water temperature	1–35°C

Make-up Outputs*

Condition	Output (L/hr)
@ 10°C	30
@ 25°C	48

* Outputs based on a feed water pressure of 4 bar.

System Specification

Parameter	Value
Pure water storage	20 litre storage tank as standard (External 50 to 100 litre tanks available)
Display panel	LCD – Colour touch screen
Pre-treatment cartridge	✔
Reverse osmosis	✔
Deionisation cartridge	–
Internal filtration	–
Point of use	–
UV lamp	–
Recirculation pump	–
Ultrapure polishing cartridge	–

Treated Water Specification vs Purified Water Storage Tank

Parameter	Treated Water Specification	Purified Water Storage Tank
Inorganics	> 99% rejection	18 MΩ·cm
pH†	Neutral	–
Bacteria	< 0.1 cfu/mL	–
Organics – TOC (ppb)	< 50	–
Particles	–	–
Endotoxins	–	–
DNases	–	–
RNases	–	–
Dispense modes	–	Gravity, Pressure feed
Dispense rate	–	up to 200 L/hour @ 1.5 bar

† pH of stored water may decrease due to absorption of free carbon dioxide.
† When measured directly across the membrane.