| Variation ID | Pack Size | List Price | Qty | ||
|---|---|---|---|---|---|
| photo_camera | 1 Pack
WAT-500-100 |
£495.00 |
RO Water Purifier
Digitally controlled direct-flow Reverse Osmosis system producing deionised quality water. Tap water passes through carbon pre-filters, a reverse osmosis membrane and a resin deioniser to produce purified deionised water. Designed for laboratory and medical use without the need for a storage tank. Supplied with filters, RO membrane, framework support with digital controller and display, tap, fitting kit, tubing and filter wrench. Requires connection to a standard water pipe, waste outlet and mains electrical socket.
Design and Features
Filtration Performance
Removes up to 99.99% of impurities from UK mains water down to 0–3ppm TDS.
Flow Rate
Up to 60L per hour at 3bar water pressure.
Configuration
Free-standing unit suitable for bench top or under bench installation.
Process
Utilises a 5 filter process with automatic reverse flush of membrane filters.
Control System
Digital controller analyses water, tracks filter lifetime and optimises system performance.
FAQs
How often do the filters need changing in the Reverse Osmosis system?
Filter change intervals depend on usage and feed water quality. The 3 pre-filters typically require replacement after approximately 12 months or 15000L. The deionising resin cartridge should be replaced when the resin changes colour. The RO membrane typically lasts at least 2years depending on usage. The digital controller indicates when filters require changing.
Model: Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System
Filters:
First 4 filters: 15,000 Liters or 6 Months whichever comes first
1) 5-Micron Sediment Filter
2) GAC Carbon Filter
3) CTO Carbon Block
Every 12-24 months (this can be lower with very hard or poor input water quality)
4) 400 GPD Reverse Osmosis Membrane
5th Filter:
Mixed Bed Deionized Water Filter. 5th Filter (Deionized) When colour changes (for nominal inlet water quality and conditions)
Technical Specifications:
System Dimensions: 48cm Height x 36cm Width x 24cm Depth
System Weight: 12 KG
Electrical Lead Length: 147cm
Electrical Plug Type: UK 3 Pin
Power usage
Idle: 0.0005 kW/hr (1kW/hr every 83 days)
Filtering: 0.016 kW/hr
System Capacity: 60 Liters / Hour @ 3 Bar
Incoming Hardness: 35 °F Max.
Incoming TDS: 600 PPM Max.
Incoming Temperature: 10 - 30 °C
Incoming Pressure: 2 Bar Min. 4.5 Bar Max.
Flow rates
@2-4 bar standing pressure : - Tap: 1 LPM, Drain 2 LPM
The system comes with
1/4" and 3/8" tubing
3/8" inlet
1/4" outlet (tap) and drain
Filter Parameter: Bacteria, E-coli, Chlorine, Sediments, Nitrates, Fluoride, Limescale, Dissolved Solids (TDS), Hormones, Pharmaceuticals, Heavy Metals