phone 0161 366 5123
mail enquiries@atomscientific.com
MD100 COD Vario Photometer Setup
Code: 276130
Revert
| Variation ID | Product Code | Pack Size | List Price | Qty | |
|---|---|---|---|---|---|
| 276130 | 1 Pack | £2590.80 |
Revert
Pack: 1 Pack
£2590.80
- ST-COD sealed tubes ready for use
- Suppression of chloride interference up to 1000 mg/L (LR & MR) up to 10000 mg/L (HR)
- Mercury free tube tests,in absence of chloride interference
- 4 ranges:
- Low range: 3 - 150 mg/L, meets ISO 15705:2002
- Middle-low range: 15 - 300 mg/L, meets ISO 15705:2002
- Middle range: 20 - 1500 mg/L, meets ISO 15705:2002
- High range: 200 - 15000 mg/L
The Lovibond® COD Setups allow highly sensitive and precise water testing with minimum effort. They measure the ST-COD concentration by photometric detection employing a linear relationship between absorbance and concentration.
After adding the sample to a Lovibond® COD tube test (LR, MR according to ISO 15705:2002), it is heated in the reactor for two hours at 150 °C and then analysed in the photometer.
The COD Setups comprise the photometer, 25 tube tests for each of the two lower measuring ranges, a reactor for sample digestion and a vial stand.
After adding the sample to a Lovibond® COD tube test (LR, MR according to ISO 15705:2002), it is heated in the reactor for two hours at 150 °C and then analysed in the photometer.
The COD Setups comprise the photometer, 25 tube tests for each of the two lower measuring ranges, a reactor for sample digestion and a vial stand.
- Raw Water Treatment
- Waste Water Treatment
| Auto – OFF | Yes |
| Portability | Benchtop |
| Compliance | CE |