High Range EC, TDS, pH and °C Meter with HI 12883 probe

HI-991301 High Range EC, TDS, pH and °C Meter

The HI 991301 high range meter offers great precision at high range to meet exacting requirements for testing pH, electro-conductivity, total dissolved solids and temperature.

The HI-991301 high range meter offers great precision at high range to meet exacting requirements for testing pH, electro-conductivity, total dissolved solids and temperature.

Designed for optimum consistency and reproducibility the HI-991301 portable high range conductivity meter offers a great range of user selectable features to deliver greater consistency and reproducibility

Different TDS factors ranging from 0.45 to 1.00 Temperature coefficients (ß) ranging from 0.0 to 2.4%

Each meter is supplied complete with:

• HI-12883 pH/EC/TDS probe with built-in temperature sensor, DIN connector and 1mm cable
• pH 4.01 & 7.01 buffer sachets
• HI-70030 12880 µS/cm and HI-70038 6.44 ppt calibration solution - 1 sachet of each
• HI-700601 Electrode cleaning solution (2 sachets)
• 100ml beaker
• Alkaline batteries: 1.5V AAA x 3
• Rugged carrying case
• Calibration certificate of meter
• Calibration certificate of probe
• Instruction manual

About the HI-12883 probe

The HI-12883 multi-parameter probe, incorporates a domed shaped pH bulb rated from 0-13 pH, a single junction Ag/Cl reference electrode with gelled electrolyte and a retractable cloth wick junction, a graphite EC/TDS cell, and a temperature sensor in one convenient, rugged polypropylene body. In addition, to ensure against interference from transient electrical noise to pH, a solid-state pre-amplifier is integrated into the probe. The probe is rated from 0 to 50°C.

Key Features:

• Simultaneous, pH, EC/TDS and temperature measurements on a large three line LCD display
• Selectable temperature unit
• pH electrode condition display
• mV of pH measurement for electrode check
• Last calibration points pH and EC
• HI-12883 dedicated pH/EC/TDS/temperature probe
• Probe quick connect system
• Battery life indication and low battery detection
• Auto-off function
• Keystroke confirmation tone
• Waterproof casing IP67

Replaceable Electrode – No need to replace the whole meter when the electrode needs replacing. Spare and replacement electrodes are available for this product.

PC Interface - Download test results to a computer programmed with HANNA’s Windows® compatible software (HI-92000), directly from equipment via a USB port or a RS232 cable outlet. (Also see Bluetooth Connection).

Optional shockproof silicon rubber boot

Specially designed to protect your instrument from damage or impact - HI-710028 - Orange, HI-710029 - blue. Buy separately.

pH Range	-2.00 to 16.00 pH*
pH-mV	±825 mV (pH-mV)
EC	0 .00 to 20.00 mS/cm**
TDS	0.00 to 10.00ppt (g/L)
Temperature Range	-5.0 to 105.0°C
pH Resolution	0.01 pH
pH-mV Resolution	1 mV
EC	1µS/cm
TDS	1ppm (mg/L)
Temperature Resolution	0.1°C
pH Accuracy @20°C	±0.02 pH
pH-mV	>±1 mV
EC/TDS	±2%F.S.
Temperature Accuracy	±0.5°C
pH Electrode	HI-12883 pH/EC/TDS temperature sensor, Quick Connect DIN connector and 1 m (3.3') cable (included); please note: HI-12883 is limited to be used from 0 to 13 pH and from 0 to 50°
TDS Conversion factor	Selectable from 0.45 to 1.00 with 0.01 increments
Battery Type / Life	3 x 1.5V AAA / approx. 600 hours of continuous use
Environment	0 to 50°C (32 to 122°F); RH max 100%
Dimensions	154 x 63 x 30 mm
Weight	196 g
Case Protection Rating	IP67
Ordering information	HI-991301 is supplied with HI-12883 pH/EC/TDS probe with built-in temperature sensor, DIN Connector and 1m cable, pH 4.01 and 7.01 buffer sachets, HI-70030 12880 µS/cm and HI-70038 6.44 ppt calibration solution sachets, HI-700601 electrode cleaning solution sachets (2), 100mL beaker, 1.5V AAA batteries (3), calibration certificate of meter, calibration certificate of probe, instruction manual and HI-710142 rugged carry case.