GroLine Hydroponic Waterproof Pocket pH/EC/TDS/Temperature Tester

Code: HI-98131

Variation ID		Product Code	Pack Size	List Price	Qty
13819	photo_camera	HI-98131	1 Pack HI-98131	£185.00

Pack: 1 Pack

£185.00

General
Specification

The HI-98131 is a slim, lightweight, and waterproof pocket tester that measures pH, conductivity, TDS and temperature. This versatile pocket meter is designed for hydroponics, greenhouse and agriculture applications.

The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI98131 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).

The HI-98131 GroLine tester features a large multi level LCD which displays both pH, EC or TDS and temperature readings simultaneously. The pH readings are displayed with a 0.01 resolution, while the EC and TDS readings are displayed with a 0.01 mS/cm and 10 ppm (mg/L) resolution.

An exposed temperature sensor allows for rapid temperature compensated measurements of EC and TDS. The LCD screen has indicators for calibration status and stability. The battery percent level is displayed at start up alerting the user to the remaining battery power that is available.

Key features

3 sensors in a single meter Waterproof - Designed to withstand the humidity of a growing environment
Wide pH Range from 0.00 to 14.00 pH
Selectable EC to TDS conversion factor
Automatic Temperature Compensation
Stability indicator HOLD button that freezes reading on the display to allow recording of measurement
BEPS (Battery Error Prevention System)
Battery % level at startup
Low Battery Indicator Auto-off

Range Ph	-	-0.00 to 14.00 pH

Conductivity	-	0.00 to 6.00 mS/cm

TDS	-	0 to 3000 ppm (500 CF); 0 to 3999 ppm (700 CF)

Temperature	-	0.0 to 60.0°C

Resolution pH	-	0.01 pH

Conductivity	-	0.01 mS/cm

TDS	-	10 ppm (mg/L)

Temperature	-	0.1°C

Accuracy Ph	-	±0.1 pH

Conductivity	-	±2% F.S.

TDS	-	±2% F.S.

Temperature	-	±0.5°C

pH Calibration	-	automatic, at one or two points using standard buffers (pH 4.01, 7.01,10.01); one point calibration using quick calibration solution

Temperature Compensation	-	pH: automatic; EC/TDS: automatic with ? set at 1.9%/°C

Battery Type / Life	-	1.5V (4) / approx. 100 hours of continuous use, auto-off after 8 minutes of non-use

Environment	-	-5 to 50°C; RH max 100%

Dimensions	-	163 x 40 x 26 mm

Weight	-	100 g (3.5 oz.)

Ordering Information	-	HI-98131 is supplied with HI73127 pH electrode, HI73128 electrode removal tool, batteries (4), instructions and quality certificate.