Variation ID | Pack Size | List Price | Qty | ||
---|---|---|---|---|---|
photo_camera | 16mm x 100 Pack
GS2516MM-100 |
£56.82 | |||
photo_camera | 22mm x 100 Pack
GS2522MM-100 |
£69.77 | |||
photo_camera | 24mm x 100 Pack
GS2524MM-100 |
£70.23 | |||
photo_camera | 25mm x 100 Pack
GS2525MM-100 |
£70.23 | |||
photo_camera | 42.5mm x 100 Pack
GS2542.5MM-100 |
£90.25 | |||
photo_camera | 47mm x 100 Pack
GS2547MM-100 |
£94.18 | |||
photo_camera | 55mm x 100 Pack
GS2555MM-100 |
£121.76 | |||
photo_camera | 75mm x 100 Pack
GS2575MM-100 |
£149.59 | |||
photo_camera | 90mm x 100 Pack
GS2590MM-100 |
£150.21 | |||
photo_camera | 124mm x 100 Pack
GS25124MM-100 |
£335.02 | |||
photo_camera | 142mm x 100 Pack
GS25142MM-100 |
£440.52 | |||
photo_camera | 257mm x 50 Pack
GS25257MM-50 |
£865.61 | |||
photo_camera | 293mm x 50 Pack
GS25293MM-50 |
£865.61 |
Advantec GS-25 Glass Fibre Filters – High Wet Strength Prefilters for Analytical and Gravimetric Use
Advantec GS-25 glass fibre filters are fine-porosity prefilters designed for analytical and gravimetric analysis, particularly in workflows where high wet strength and structural integrity are required. With a nominal retention of 0.6 µm and a medium flow rate, these filters are ideal for clarifying liquids ahead of membrane filtration or for general-purpose particulate removal.
Constructed with an organic binder, GS-25 filters offer enhanced mechanical durability under wet conditions, although they are best used with light to moderate particulate loads due to their limited dirt-holding capacity.
Key Features
Organic binder for improved wet strength
Fine porosity with 0.6 µm (<0.65 µm) nominal retention
Medium flow rate: 15 mL/min/cm²
Suitable as a prefilter for finer membranes
Thermal resistance up to 120°C
Thickness: 0.22 mm | Weight: 70 g/m²
Prefiltration for analytical and gravimetric workflows
Sample clarification prior to membrane filtration
General particulate removal in low-load applications
HEPA-type air filtration
Prefiltration for analytical and gravimetric workflows
Sample clarification prior to membrane filtration
General particulate removal in low-load applications
HEPA-type air filtration
Specification
Grade: GS-25
Features & Applications: Limited dirt holding capacity, high wet strength. Common prefilter (for 0.65 µm or smaller pore sizes). HEPA type air filter.
Nominal Retention: 0.6 µm
Thickness: 0.22 mm
Weight (g/m²): 70
Water Flowa: 15
Max. Op. Temp.: 120°C
Binder: Organic
a The time in seconds to filter 100 mL of distilled H20 at 20°C under pressure supplied by a 10 cm water column through a 10 cm² section of filter
HS Code / Commodity Code: 7019905140