Clifton NE9S Digital Lab Oven - 56 Litre

Code: NE9-56S

Variation ID		Product Code	Pack Size	List Price	Qty
30483	photo_camera	NE9-56S	56 Litre x 1 Pack NE9-56S	£2056.00

Pack: 56 Litre x 1 Pack

£2056.00

General
Specification

Temperature Range : Ambient 5°C - 300°C

The Clifton Range NE9S Digital Laboratory Ovens by Nickel-Electro offer precision temperature control from ambient +5°C to 300°C with timer functions.

These lab ovens can run at set temperature immediately, use run back timer or enable a delay start feature. Can be configured for gravity convection or with variable fan speed providing forced air circulation within the chamber.

The oven chamber is constructed from high quality stainless steel with high efficiency thermal insulation, contained within an outer steel housing with anti-bacterial paint finish.

With energy efficiency in mind, particular attention is paid to robust design, insulation, a tight door closure with silicone seal and hinge design to maintain chamber temperatures with intelligent temperature control.

Features and Benefits

The NE9S Series comes with a 3 year warranty as standard. Nickel-Electro also offer free advice and support.

Clifton lab ovens feature intuitive easy to use controls with a bold illuminated LED display, offering precise temperature control from ambient +5°C to 300°C with timer functions.

Before leaving the factory, every product is identified with a unique serial number and undergoes factory calibration against a known traceable value. Each unit is electrically tested for safety during final inspection, with a test certificate enclosed in the instruction book.

Featuring bold illuminated LED display of measured temperatures in real-time, in increments of ±0.1°C with intuitive controls, utilising touch sensitive keypads. Indicators for heating, timer and alarm.

The chamber is constructed from high quality stainless steel with high efficiency thermal insulation, contained within an outer steel housing with anti-bacterial paint finish.

A broad range of accessories is available to suit different applications.

Safety Features

• Switching on the controls undergoes an automatic diagnostic check.

• Features a temperature sensor fail alarm with error reporting on LED screen.

• Over temperature alarm is automatically set 5°C above set point.

• Door open – heating is interrupted, after a short delay a door sounder chimes until door is closed, heating resumes.

• Fitted with Class 1 oven temperature thermostat for overall unit protection.

Controls

Featuring bold illuminated LED display of measured temperatures in real-time, in increments of ±0.1°C with intuitive to use controls, utilising touch sensitive keypads. Indicators for heating, timer and alarm. Exhaust air flap is dial adjustable from 0 to 100% for chamber venting. Fan chamber convection variable from 0% to 100%. Fan convection improves temperature uniformity and heating recovery time. Door, lockable with 2 point door engagement for an even seal. Left hand side of the oven features a 35mm diameter access port, with perforated flap cover, to reduce heat loss when used with external probes.

Notes

Before ordering please check the room or building access where this unit will be installed and electrical power requirements. Temperature fluctuation measurements are based on temperature readings on the shelf in centre of the chamber. Drying ovens up to 112 litres are stackable. Do not place in direct sunlight or near a heat or cold source. Allow a 100mm air gap away from the wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.

Shipped direct by Nickel-Electro

All Nickel-Electro products are securely packed for safe delivery. Orders are fulfilled from their Weston Super Mare facility, ensuring fast and reliable UK delivery.

Product Code	NE9-15S	NE9-32S	NE9-56S	NE9-112S	NE9-240S
Chamber Capacity	15 Litres	32 Litres	56 Litres	112 Litres	240 Litres
Temperature Range	Ambient + 5°C - 300°C
Temperature Control	PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature Alarm	Over temperature alarm is automatically set 5°C above set point
Temperature Sensor	pt100 with control diagnostics at power up
Temperature Fluctuation	±0.4°C at 150°C
Temperature Variation	±1.8°C at 150°C
Temperature Heat Up 150°C	25 Minutes
Temp. Door Open Recovery 150°C	5 Minutes
Temp. Control & Run Back Timer	Visual indicator and end messaging 00:01 to 99:59 (hh:mm) activates at set temp
Temp Control & Delay Start Timer	Heating commences at a set time in the future, within 24 hours
Chamber Convection	Fan speed can be set from 0% gravity convection within the chamber variable to 100% for forced air convection
Exhaust Air Flap	Adjustable 0 to 100% chamber venting
Access Port	35mm port size, perforated flap cover helps to reduce losses when fitting independent external probes or thermocouples
Doors	Single insulated door, lockable with 2 point door engagement for an even seal
Door Alarm	Door open, heating interrupted, delay before door sounder chimes until door closed, heating resumes
Shelves Fitted & Max.	1 wire / 3 max		2 wire / 5 max	2 wire / 8 max	3 wire / 10 max
Shelving Locations	Available every 20mm vertically
Shelf Maximum Load	10Kg	20Kg
Heater Power (220-240V)	1050W	1100W	2150W		3200W
Voltage	230V 50-60Hz				230V 50/60Hz blue power plug 2P+E
Stackable	Yes				No
Feet/Castors	Levelling feet
Dimensions
External (mm)	520w x 390d x 600h	600w x 460d x 680h	600w x 605d x 720h	600w x 660d x 980h	800w x 720d x 1160h
Internal (mm)	320w x 180d x 240h	400w x 250d x 320h	400w x 400d x 360h	400w x 450d x 620h	600w x 510d x 800h