Clifton NE5 Digital Shaking Bath with Timer - 28 Litre

Code: NE5-28DT

Variation ID		Product Code	Pack Size	List Price	Qty
30510	photo_camera	NE5-28DT	1 Pack NE5-28DT	£2502.80

Pack: 1 Pack

£2502.80

General
Specification

The Clifton NE5-D series of shaking water baths, feature precision PID control, allowing observation of set and actual temperature simultaneously. A broad range of accessory flask clips and racks ensures flexibility for routine and specialised work.

NE5-D features bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control.

NE5-28DT has a built in timer, settings variable, 00:01 to 99:59 [hh:mm] which activates at set temperature. Settings retained even after turning the unit off.

Accessory clips and racks can be mounted onto the perforated tray which fits onto the reciprocating stainless steel trolley. Flasks and test tube racks can easily be loaded and unloaded by lifting out the complete shelf. The trolley can also easily be removed for cleaning. The perforated tray is supplied as standard.

All models feature a high quality corrosion resistant stainless steel tank, with a bright clean finish housed in a durable painted outer case. Painted surfaces feature anti-bacterial finish with good chemical resistance.

Features and Benefits

The NE5 Series comes with a 3 year warranty as standard.

Clifton shaking water bath designed for immersion of flasks, bottles and racks in a highly stable temperature environment throughout the water bath. The shaking baths feature a useful stainless steel recessed tray for standing flasks on prior to and after immersion.

Before leaving the factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

Bold temperature control panel ensuring set and actual water temperature can be easily seen.
Quiet running shaker mechanism and drive motor.

SPainted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments.

The trolley is stable in use and the removable perforated shelf makes loading and unloading easy, unlike other traditional shaker baths where the whole shaker carriage has to be removed.

Safety Features

• Thermal cut out fitted in the heater.

• The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and the actual bath temperature is shown. If bath is over temperature heating is switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown and the control resumes.

• Bath fitted with non-slip rubber feet.

Controls

Featuring a bold LED display of measured temperatures in real-time and in increments of ±0.1°C, using a precision PID temperature controller. Temperature settings are retained in the memory, even after the unit has been turned off. Easy to use controls, utilising touch keypads for setting temperature values. Features auto setting temperature alarm protecting samples at set temperature. Every unit undergoes a factory calibration at two temperatures for validation.

Energy Consumption

0.33kWh @ 37°C
0.34kWh @ 60°C – lid fitted
(Based on NE5-10D)
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading.

Shaking control 0 to 400 strokes / 0 to 200rpm – stroke length variable up to 40mm (excluding NE5-10D which is fixed at 20mm). Opening the side access port allows stroke length to be varied.

Heaters and temperature sensor are concealed under the tank providing an easy to clean working area. The heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity.

Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres – see accessories. Covering the bath with a lid reduces energy consumption and running costs.

Shipped direct by Nickel-Electro

All Nickel-Electro products are securely packed for safe delivery. Orders are fulfilled from their Weston Super Mare facility, ensuring fast and reliable UK delivery.

Product Code	NE5-10D	NE5-28D	NE5-28DT
Chamber Capacity	10 Litres	28 Litres
Temperature Range	Ambient + 5°C - 100°C
Temperature Alarm	Under/over temperature alarm automatically set 4°C above and 4°C below set point
Temperature Control	PID Digital, LED display showing actual and set temperature, resolution 0.1°C
Sensitivity	±0.1°C at 45°C
Uniformity	±0.1°C at 45°C
Heater Power (220-240V)	800W	1000W
Timer	No		Indicator and end message Variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Voltage	230V 50-60Hz
Linear Shaking Control	Shaking control variable 0 to 400 strokes / 0 to 200rpm
Stroke Length	Fixed 20mm stroke	Variable up to 40mm stroke
Speed Display	Analogue
Drain Outlet	No	Yes
Dimensions
External (mm)	449w x 332d x 290h	715w x 332d x 290h
Internal (mm)	242w x 300d x 200h	500w x 298d x 200h
Perforated Shelf/Trolley Size (mm)	175w x 270d	389w x 270d
Water Level Maximum (mm)	120
Water Level Minimum (mm)	50