Clifton NE4-HT High Temperature Circulating Digital Water Bath Stirred - 22 Litre

Code: NE4-22HT

Variation ID		Product Code	Pack Size	List Price	Qty
30466	photo_camera	NE4-22HT	22 Litre x 1 Pack NE4-22HT	£1281.94

Pack: 22 Litre x 1 Pack

£1281.94

General
Specification

Temperature Range : Ambient 5°C - 130°C

Clifton digital circulating baths are designed for circulation of temperature controlled water or heat transfer fluids in a closed circuit or for maintaining a stable temperature environment in the bath for the immersion of flasks, bottles and racks.

Clifton circulating baths are constructed using durable stainless steel, painted surfaces are powder coated with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean also have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing excellent water temperature stability. Indication of heating, over temperature alarm and timer running.

This range features the ability to pump temperature controlled liquid around a closed circuit. Featuring a circulation pump with the capacity of 10 litres per minute.

In addition to circulating around a closed vessel, this range has the capability of operating up to 130˚C.

Features and Benefits

The NE4-HT Series comes with a 3 year warranty as standard. Nickel-Electro also offer free advice and support.

Clifton digital water and oil heating circulators are designed for external circulation of temperature controlled water and heat transfer fluids in a closed circuit or for maintaining a stable temperature environment in the bath for the immersion of flasks, bottles and racks. Efficient water movement and temperature control provides accurate temperature stability throughout the water bath.

Before leaving the factory, every water bath is identified with a unique serial number and undergoes factory calibration against a known traceable value. Each unit is electrically tested for safety during final inspection, with a test certificate enclosed in the instruction book.

Painted surfaces feature anti-bacterial technology that inhibits bacterial growth, helping to support hygiene requirements in clinical and laboratory environments.

A broad range of accessories is available to suit different applications.

Safety Features

• The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition, the indicator illuminates and actual bath temperature is shown. If bath is over temperature, both heating and stirring are switched off. Once liquid temperature has fallen or risen above/below the alarm setting, the indicator clears and actual bath temperature is shown.

• Features a low liquid level float switch, which ensures heating is switched off if the liquid falls below the recommended level – display will show “FiLL”. Heating is switched off but stirring continues. To reset, carefully top up the liquid to the recommended level.

• A second safety device can be set just above the working temperature protecting samples.

Energy Consumption

0.5kWh @ 37°C
The lower the figure, the less energy used. Information supplied for size and range comparison, guidance only and measured consumption at set point. Please remember that the energy consumption may vary due to factors such as location, ventilation, ambient temperatures and loading.

Heating/Cooling Information

For cooling a liquid bath use an accessory immersion cooler DC1-300 refer to Accessories. Where bath temperatures are below ambient we recommend a mix of glycol and water. We also recommend a lid or layer of spheres for insulation. The water bath should be used in ambient temperature 20°C. For liquid temperatures above 60°C we recommend that an accessory lid or layer of spheres are used for optimum performance. This will reduce evaporation and a lid will keep the samples and liquid free from contamination. Optimum performance saves energy by reducing electricity consumption and running costs.

Shipped direct by Nickel-Electro

All Nickel-Electro products are securely packed for safe delivery. Orders are fulfilled from their Weston Super Mare facility, ensuring fast and reliable UK delivery.

Product Code	NE4-8HT	NE4-14HT	NE4-22HT
Chamber Capacity	8 Litres	14 Litres	22 Litres
Temperature Range	Ambient + 5°C - 130°C
Temperature Control	PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature Alarm	Under/over temperature alarm is automatically set 4˚C above and 4˚C below set point
Second Safety Device	Yes
Sensitivity	±0.05°C
Uniformity	±0.01°C
Timer	Variable, 00:01 to 99:59 hh:mm. Activates at set temperature. End timed period, audible buzzer and "end" message.
Pump Capacity and Pressure	10 litres/min - 150mbar Pressue drop can occur with pipe height, length, bore, bends and liquid temperatures below ambient
Pump Connection Ports	Inlet and outlet ports take 4mm bore x 6mm o/d tubing
Heater Power (220-240V)	1250W
Voltage	120V or 230V models available 50-60Hz
Dimensions
External (mm)	271w x 332d x 170h	361w x 332d x 170h	537w x 322d x 170h
Internal (mm)	129w x 300d x 150h	219w x 298d x 150h	395w x 298d x 150h
Water Level Max. (mm)	130
Max Depth Above False Base (mm)	95