pH / Temperature meter for Plating Baths

Code: HI-99131N

Variation ID		Product Code	Pack Size	List Price	Qty
23212	photo_camera	HI-99131N	1 Pack HI-99131N	£624.50

Pack: 1 Pack

£624.50

General
Specification

HI-99131 Plating Bath pH Meter

The HI-99131 portable pH meter, together with the HI-629113 pH probe, are designed specifically for pH measurements in plating baths. Plating baths can vary from acid to neutral to alkaline with many different chemical formulations used. The common necessity is the fast and accurate measurement of pH to ensure that additives and chemicals are working properly to provide even and consistent plating.

The HI-99131 pH meter is a portable, lightweight meter with two button operation that is simple to use. It is delivered with a rugged pH electrode protected by a titanium body that functions properly in an applied current field thus permitting the flexibility of bringing quality pH measurements directly the operation.

HI-629113 pH electrode has been specially designed for applications in plating baths. The titanium electrode body acts like a Faraday cage, and allows stable readings even in samples where strong electrical fields are involved. Moreover, a built-in temperature sensor allows simultaneous temperature compensated pH and temperature readings and an integral pH sensor pre-amplifier provides measurements impervious to noise and electrical interferences.

Key Features:

Simultaneous pH and temperature measurements on a large dual-line LCD Display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
Selectable temperature unit °C or °F
Electrode condition indicator
mV of pH measurement for electrode check
HI-629113 dedicated pH with integral temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67

Each meter is supplied complete with:

HI-629113 pre-amplified pH probe with built-in temperature sensor and titanium body, DIN connector with 1m cable
pH 4.01 & 7.01 buffer sachet
HI-700601 electrode cleaning solution x 2 sachets
100mL beaker
Alkaline batteries: 1.5V AAA x 3
Rugged carrying case
Calibration certificate of meter
Calibration of certificate of probe
Instruction manual

pH Range	-2.00 to 16.00 pH/-2.0 to 16.0
Temperature Range	-5.0 to 105.0°C / 23.0 to 221.0°F
pH Resolution	0.01 pH/0.1 pH
Temperature Resolution	0.1°C / 0.1°F
pH Accuracy	±0.02 pH/±0.1 pH
Temperature Accuracy	±0.5°C (up to 60°C), ±1°C (outside); ±1.0°F (up to 140°F), ±2°F (outside)
pH Calibration	automatic, 1 or 2 point selectable buffer standards (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18)
Temperature Compensation	Automatic, -5 to 105°C (23 to 221°F)
pH Electrode	HI-629113 preamplified pH probe with built-in temperature sensor and titanium cage working as matching pin, DIN connector and 1 m (3.3') cable (included)
Battery Type / Life	3 x 1.5V AAA / approx. 1400 hours of continuous use: auto-off after 8 minutes of non-use
Environment	0 to 50°C (32 to 122°F); RH max 100%
Dimensions	154 x 63 x 30 mm (5.9 x 3.1 x 1.4")
Weight	196g
Case ingress protection rating	IP67